Post by flshooter on Dec 30, 2013 0:51:32 GMT -5
From the repair point of view they are not desirable guns, they are replacable hunks of plastic assemblys. I have a 770 in the shop now with one little spring missing. To fix the gun you ship it to Remington and they replace a whole assembly for $70 plus shipping two ways for a5 cent spring. Another prime example of our throwaway society. IMHO the 788 was twice the gun at 1/2 the price and I would rather even have a Savage 340 than a new plastic Remington.
On the other hand, how many times will the typical hunting rifle be fired in its owner's lifetime?
I took my new Remington 783 in 7mm Rem Mag to the range yesterday and shot 150 gr Sierra MatchKing bullets over 57 gr H4350 with a Federal 215 primer. I shot 20 shots in all from a bench, some while using an adjustable front rest and fixed rear, and some while using a fixed front bag and ‘squeeze’ bag I made for the rear.
The fore-end doesn’t sit stably in my adjustable front rest; the fore-end is very slim and just wallows around, which made it hard to get good groups at first. But the trigger’s good (reportedly 3.5 lb from the factory, and user-adjustable from 2.5 to 5 lbs) and it broke cleanly with no noticeable creep or stacking.
I zeroed the scope by removing the bolt and looking through the barrel at a target placed at 25 yards, then adjusting the scope to match. Got the first shot on the paper, shot two more to fine-tune and I was ready to rock. Shot 3 more at the 25 yard target to get used to the rifle, then started shooting at 100 yards.
At 100 yards shots were hitting high and right, so I had to adjust the scope again. After I’d re-zeroed the scope, the ‘wallowing’ fore-end took a few shots to overcome. My best 3-shot group measured about 0.4” center-to-center, so I’m pretty happy with it.
Here’s my best 100 yard group.