bounce
Royal Member
Posts: 5,727
|
Post by bounce on Oct 14, 2012 19:59:13 GMT -5
Put some metal plates under the shop stove's legs to raise the stove pipe up a little for a tighter fit, Pulled out my trap for Sean to do some shooting, he used my .410 O/U SAVAGE 242 for his 1st time and got 7 out of ten, then we went and painted on the house thinking all of us would be back to shoot more, well that din't happen but before I put it in I sat down in a chair by the thrower and finish off the box of shells And broke 13 out of 15 with the savage 242 I could sit and do that all day if I had a truck load of .410 shells LOL. as it was fun & pleasant to shoot. I just may need to buy a lot more .410 shells?
|
|
bounce
Royal Member
Posts: 5,727
|
Post by bounce on Oct 18, 2012 9:51:08 GMT -5
I think it is about time I lay in some wood for the shop, like today maybe?
|
|
bounce
Royal Member
Posts: 5,727
|
Post by bounce on Oct 23, 2012 19:04:52 GMT -5
Mom had her 98th birthday today, had the sindig last sunday.
|
|
|
Post by deputydon on Oct 23, 2012 19:11:44 GMT -5
Tell her HAPPY BIRTHDAY for me !!!
|
|
|
Post by deputydon on Oct 23, 2012 19:13:29 GMT -5
I think it is about time I lay in some wood for the shop, like today maybe? I would think that Bohemian could cut wood fer food !!!
|
|
|
Post by Jack on Oct 23, 2012 21:35:10 GMT -5
Happy Birthday wishes to your mother, Bounce.
|
|
bounce
Royal Member
Posts: 5,727
|
Post by bounce on Oct 25, 2012 18:57:54 GMT -5
Thanks guys & mom is doning well to.
Well The shop has Heat now, I don't think a guy will get to toasty in it but you are supoise to be working too lol. Today I sealed every crack I could that any light came through with the expanding foom insulation spray can. Now just a little light at the bottom of three doors were nothing can be done unless I tear out the concrete and replace it hopeing for better lol. 3 rugs would work lol. Not bad for one building being over 100 years old & the other over 65
|
|
bounce
Royal Member
Posts: 5,727
|
Post by bounce on Nov 10, 2012 1:44:57 GMT -5
Ordered a new sand blasting cabnet for my shop, should come next week maybe.
I thought I had the metal laith running without throwing belts but today I tried it again and had belt troubles again??
|
|
bounce
Royal Member
Posts: 5,727
|
Post by bounce on Dec 26, 2012 11:51:22 GMT -5
The deal on the sandblasting cabnet fell through I guess? But the shop did well for christmas as it got an old 8 gun rack for holding guns when useing the shop range and also a stuffed flying pheasant shot just north the house hear this year. I have it flying in the shop now & it's about to fly by my volkswagon sign now forever lol. Ben working on the model T motor, the block is finished but when we tryed to put the trasmission on we hit a big problem, the tranny must have a warped flywheel and is of no use to me.....bummer
|
|
bounce
Royal Member
Posts: 5,727
|
Post by bounce on Dec 26, 2012 12:05:42 GMT -5
From now till spring sometime I will be picking up a Tree & two old car's or what't left of them. Not shure why ?? just think it's a good deal I guess LOL. one is a model A frame & motor block. the other is a 1927 buick with no motor or body wood so mostly in peaces & a big heavy frame & fenders. LOL. Checked on e-bay & buick parts are high priced their so that's good lol.
|
|
bounce
Royal Member
Posts: 5,727
|
Post by bounce on Dec 29, 2012 8:56:48 GMT -5
At -2 this morning I have reached the place I don't want to go out & warm up my new shop LOL.
|
|
|
Post by Bill on Dec 29, 2012 9:23:25 GMT -5
I understand that one completely. I think that the banana belt slipped on the peel as it is 1 degree here. My dog is pissed because I would not take her out for a run. Duh.
|
|
bounce
Royal Member
Posts: 5,727
|
Post by bounce on Jan 2, 2013 11:59:50 GMT -5
This afternoon I am takeing my new engine & transmission jack & hoist I call Donnie over to sitting Bulls garage to try and make something out of that tranny I bought and is not right. May just end up haveing to use a distributor in the end? Rather than original sparking?
|
|
bounce
Royal Member
Posts: 5,727
|
Post by bounce on Jan 3, 2013 7:31:35 GMT -5
Had a good day yesterday, in the end the flywheel is warped a little but we got the tranny on perminately as well as the pan & the transmission bands are now wired in place. Need to order some parts before the hoghead is put on. The motor will need to run off the battery & likely not do well at all with out one but I will have a battery anyway for the starter so it should work hopefuly. Allso found out paul has two model T truck frames one is pretty compleat with axels & wheels & one just the frame & rear axel that is likely not a working axel But they will likely be mine, more rust LOL and also he has a 1934 AC WC I would like to get that also but I don't know if I can drink that much negosheations beer anymore, but guess I must see if I can as I would like haveing a 1934 AC WC LOL.
I belive sitting bull was realy impressed with my Transmission jack & hoist I brought along as he was LQQKING UP at him all the time LOL.
|
|
bounce
Royal Member
Posts: 5,727
|
Post by bounce on Jan 7, 2013 21:24:17 GMT -5
You never know when old tractor lighting may strike, Today I was pumping gas up at Feather Hill when the wife of an old tractor I have ben eyeing for years pulled up for gas on the other side. She started talking so I asked if her husban may sell it, she thought so and will ask him. It's an old Rye tractor.
|
|